Blog
Reconsideration of Value During the UAD 3.6 Transition: What Changes in the Report, the Dates, and Your Software
The GSE reconsideration of value (ROV) requirements are not tied to a report version, but UAD 3.6 changes the appraisal an ROV starts from, the dates that govern revisions, and what your software has to record. With the November 2, 2026 mandate in effect and some Sellers operating under a temporary policy exception, lenders are running ROVs on UAD 2.6 and UAD 3.6 reports side by side. This post covers what changes in each.
The ROV Lender Guide condenses the audit-trail elements and the software capture checklist into a quick reference for compliance and operations teams. For the documentation process itself, read our companion post.
Download the ROV Quick Reference Guide →
Read: Reconsideration of Value Under UAD 3.6 →
What UAD 3.6 Changes About the Appraisal a Value Challenge Starts From
UAD 3.6 replaces the legacy form set with one dynamic URAR and delivers the data as a structured MISMO 3.6 package. The 1004, 1073, 2055, and other form numbers give way to a single report whose sections appear based on the property and the assignment. Each report goes to UCDP as a ZIP package with an XML data file, a PDF, and an images folder, and the Submission Summary Report returns feedback in both PDF and JSON. The full side-by-side is in our UAD 2.6 vs UAD 3.6 comparison.
Condition and quality are where ROV files feel the change most. The C1 to C6 and Q1 to Q6 scales stay. What changes is the structure: appraisers now rate exterior and interior separately, add room-level detail for each kitchen and bathroom, and reconcile those to an overall rating. The GSEs publish definitions with criteria and examples for every rating, including limits such as C1 being reserved for dwellings completed within the past 12 months. A condition dispute can now point to a specific interior or exterior rating, a room-level entry, and the published definition, instead of arguing with a single overall number.
What the September 30 Policy Exception Means for ROV Files
The November 2, 2026 mandate is in effect and not changing, and Sellers that couldn't meet it may hold a temporary, one-time policy exception. The GSEs' September 30 announcement (see also Fannie Mae Lender Letter LL-2026-08) sets this timeline for Sellers that hold the exception:
November 2, 2026 to February 28, 2027: Sellers granted the exception may submit UAD 2.6 reports to UCDP with normal functionality.
March 1 to May 19, 2027: UAD 2.6 reports can still be submitted, but the collateral risk score returned is “999” in Collateral Underwriter and “99” in Loan Collateral Advisor, and loans delivered with a UAD 2.6 appraisal are not eligible for enforcement relief for breaches of certain representations and warranties on the appraisal and value (Selling Guide A2-2-06). The GSEs strongly encourage Sellers to implement UAD 3.6 before March 1.
May 20, 2027: UAD 3.6 becomes mandatory for all Sellers. Through June 27, 2027, UAD 2.6 is allowed only for exception holders' resubmissions of previously submitted reports.
June 28, 2027: UAD 2.6 is retired.
Sellers that have implemented UAD 3.6 are unaffected. Only Sellers can hold the exception, granted separately by each GSE. Lenders that do not sell directly to the GSEs don't hold one but must align with their investors, and aggregators must make sure their third-party originators are submitting UAD 3.6 appraisals or hold the exception themselves.
Two points matter for ROV files. First, an ROV outcome arrives as a revised appraisal report, and revisions to a UAD 2.6 report first submitted before the mandate stay in UAD 2.6 (through May 3, 2027, or June 27, 2027 for resubmissions under the exception). Know which version each in-flight file was first submitted in: UCDP does not allow UAD 2.6 and UAD 3.6 submissions to be mixed under the same Document File ID, so a report first submitted in UAD 2.6 stays in UAD 2.6 for every revision. The same applies to a 1004D/442 update or completion report on a UAD 2.6 original: it must be submitted in UAD 2.6 and associated with the prior UAD 2.6 submission. Second, loans delivered with a UAD 2.6 appraisal during the reduced functionality period lose eligibility for enforcement relief on certain appraisal and value representations and warranties, which raises the stakes on validating the valuation and keeping the record behind it.
What Software Should Capture to Support ROV Files
The software behind your ROV workflow should capture the whole chain, not just the outcome. The Platform Comparison Checklist on the Readiness Hub covers how to evaluate platforms against these points.
At initiation: a timestamp with date, time, and timezone; the requester's identity (user ID, department, email); the ground selected from a menu rather than free text; and the original appraised value.
At resolution: the appraiser's written response (text or file upload); the lender's decision and rationale; the new appraised value and the change, if any; and a timestamp for file closure.
In the audit log: every change to the request logged with time and user; edits to the rationale showing both old and new values; the appraiser's response date tracked separately from the submission date; and the delivery date to the secondary market tracked so pre- and post-delivery status is unambiguous.
The ROV file should also tie into the loan origination or document management system, so the request, data, response, and decision can be retrieved as one unit during a QC review or investor request. Email threads and manual filing make that much harder to do.
Connexions supports UAD 3.6 and UAD 2.6 orders side by side and submits to UCDP and EAD, with an ROV workflow that timestamps each request, logs the appraiser's response, and keeps an audit log of every change. To see it in action, book a 15-minute demo.
Frequently Asked Questions
Is UAD 3.6 mandatory now?
Yes. UAD 3.6 has been mandatory since November 2, 2026, and the GSEs state the mandate is not changing. Sellers granted the temporary policy exception may keep submitting UAD 2.6 reports through May 19, 2027. The exception is one-time and will not be extended. More answers are in our UAD 3.6 deadline FAQ.
Can a UAD 2.6 appraisal be revised after the mandate?
Yes. A UAD 2.6 report first submitted to UCDP by November 1, 2026 can be revised under its existing DocFile ID through May 3, 2027. Sellers with a policy exception may resubmit UAD 2.6 reports through June 27, 2027. The date that counts is the initial UCDP submission, not the order date or the appraisal effective date, and every revision under that Document File ID has to stay in UAD 2.6. That includes the revised report that comes back from an ROV.
Do condition and quality ratings change under UAD 3.6?
The C1 to C6 and Q1 to Q6 scales stay. Appraisers now rate interior and exterior separately and reconcile them to an overall rating, using GSE-published definitions with criteria and examples for each rating.
Download the ROV Quick Reference Guide →
Read: Reconsideration of Value Under UAD 3.6 →
These resources are also housed on the UAD 3.6 Resources Hub, alongside the ROV Lender Guide, the UAD 3.6 vs UAD 2.6 Comparison, and the Platform Comparison Checklist.
Grounded in Fannie Mae's Selling Guide (B4-1.3-12) and UAD 3.6 Policy Supplement, Freddie Mac's Seller/Servicer Guide (5604.4) and Bulletin 2025-7, Fannie Mae Lender Letter LL-2026-08, Freddie Mac's UCDP FAQ, and the GSEs' September 30, 2026 policy exception announcement. This article is informational only and does not constitute legal, compliance, or regulatory advice.


